Sunsynk Kit – Sunsynk 10kW Hybrid – Sunsynk 10.65kWh Lithium – Fully Installed


The Sunsynk 10kW kit is a fully fledged, fully installed, pre solar kit, complete on both the AC and DC side.

This kit has the following performance properties:

Inverter Capacity: 10kW Single Phase

Battery Capacity: 10.65kWh

Remote Communications: Yes, if wifi available at install point

Category: Tag:


Model:  Sunsynk 10kW

Rated Power: 10kW

Type: True Hybrid

Input Voltage: 230 VAC

Voltage Range: 220 – 240 V

Frequency: 50/60 Hz

Spec Sheet: Sunsynk_SinglePhase_10-12kW_Datasheet_v3_English

Battery Storage

Battery Type: 1 x Sunsynk 10.65kw Wall mount

Total Storage: 10.65kWh

Module Nominal Voltage: 51.2V

Operating Temperature Range: -10 °C ~ 55 °C*

Cycle Life:  6000 cycles @ 80% DOD

Spec Sheet: SUN-BATT-1065-datasheet_220818_194854 (1)

Balance of System

1 x Keto 250Amp Battery Disconnect Fuse Breaker

1 x AC Protection Box – Surge Arrestor/2 x 50Amp Breakers/50Amp Changeover

Full Installation Notes

  • Installation offering for JHB, Port Elizabeth, Alexandria, Cape Town, Pretoria, Durban, Pietermaritzburg and within 50kms of those main centers.
  • Offer assumes that installation point is within 20M from mains db board.
  • Mains DB must have an existing Certificate of Compliance, extra will have to be charged if a COC needs to be done.