Description
Make: Sunsynk 50kW HV – Sunsynk 61.44kWh Battery – 55.35kWp Canadian Solar
Inverter
Battery Input Date
Battery Type: Li-Ion
Max. Charging Current: 50A+50A
Max. Discharging Current: 50A+50A
Number of battery input: 2
Charging for Li-lon Battery: Self-adaption to BMS
PV String Input Data
Max. DC Input Power: 65000W
Max. DC Input Voltage: 1000V
Start-up Voltage: 180V
MPPT Range: 150-850V
Full Load DC Voltage Range: 450-850V
Rated DC Input Voltage: 600V
AC Output Data
Rated AC Output and UPS Power: 50000W
Max. AC Output Power: 55000W
Peak Power(off grid): 1.5 time of rated power, 10 S
AC Output Rated Current: 75.8/72.5A
Max. AC Current: 83.3A
Max. Continuous AC Pass through: 150A
Spec Sheet: Sunsynk_ThreePhaseHI_25_50K_Datasheet_v6_English
Battery Storage
Battery System Power (kWh): 61.44
Charge/Discharge Rate (Max): 1C
Max Charge / Discharge Current (A): 100
Module Capacity (Ah): 100
Operating Voltage (V): 538~691
Battery Cell Chemistry: (LiFePO4 or LFP)
Dimension (W×D×H mm): 589×590×2240
Total Weight: (kg) 628
Operating Altitude: ≤2000m
Relative Humidity Range: 5%~85% (RH)
Warranty Period: 10 years
Enclosure IP Rating: IP20
Spec Sheet: Sunsynk_High Voltage-Series_Datasheet_v7_English
Solar Array
Rated Maximum Power: 620w
Open Circuit Voltage: 48.50
Maximum power Voltage: 40.21
Short circuit: 16.13
Maximum Power Current: 15.42
Module efficiency: 23.0
Power Tolerance: 0~+3%
Number of Units: 80
Data Sheet: Datasheet_-_Ja_Solar_JAM72D40_575-600_LB_(EN)_(2)[1]
Balance of System
1 x Keto 125Amp Battery Disconnect Fuse Breaker
1 x AC Protection Box – Surge Arrestor – 2 x 150Amp Breakers – Changeover
2 x 25mm x 2m Battery Cable
1 x 6 String DC Input Protection Box
1 x AC Protection Box – Surge Arrestor – 2 x 150Amp Breakers – Changeover
2 x 35mm x 5m Battery Cable
Full Installation Notes
- Installation offering for JHB, Port Elizabeth, Alexandria, Cape Town, Pretoria, Pongola, Durban and within 100kms of those main centers.
- Installation by fully certified HV technicians.
- No extreme angle roof types (>30 degrees) and no slate roof types that may require slate kits.
- Extra will have to be charged if panel lifts are required or ladder rental for very high roofs.
- Offer assumes that installation point is within 20M from mains db board.
- Mains DB must have an existing Certificate of Compliance, extra will have to be charged if a COC needs to be done.
