The 14.4kWh load shed kit is normal household operation. You can take out entire rooms, whole circuit breakers and if you are using power efficiently, you can take out your entire house.
2 x Kodak Axpert – 5kW 48v King Inverter Chargers
3 x Hubble 4.8kW 48v Lithium Ion Batteries
1 x KETO Battery Disconnector with 250A Fuses
2 x MGSA 100cm x 35mm Battery Cable
2 x MGSA 35cm x 35mm Battery Cable
The inverter needs to be wired into a distribution board or a pre designated red circuit. A red circuit is a breaker on your distribution board that will have all your persistent (immune to power outage) loads connected to it. Naturally you can also wire in an extension lead type plug point but ideally this inverter should be a more permanent fixture.
The system has a largish inverter(10kW) and a decent battery capacity. The total expected operation of this system is 5760 watts per hour during load shed, anymore would not allow you to sustain a 2.5 hour load shed.
In addition to this, the components used are full sub assemblies for solar systems. This means that should you want to go completely off grid, or lower you monthly energy bills, you merely need to add solar panels.
An additional benefit of the system is the inverter which as its own built in charger, thus the system is completely self sustaining and does not require management or user intervention. It automatically kicks in when load shedding starts and automatically charges the battery when load shedding ends. You would not notice a load shed for anything connected to that system.
Its a Taiwanese imported inverter charger, its a hardy piece of equipment, this unit looks good and is extremely popular locally. Should there be any problem on the inverter it is locally supported. The battery is top of its class lithium ion stack with onboard BMS technology.